Katalóg Produktov
Menu

KALENDÁŘ AKCÍ

Last-Mile OTDR — MaxTester 715B
  • Handy, lightweight, powerful, tablet-inspired design
  • 7-inch, outdoor-enhanced touchscreen – the biggest in the handheld industry
  • 12-hour autonomy
  • Dead zones: EDZ 1 m, ADZ 4 m
  • Dynamic range of 30/28/28 dB
  • Rugged design built for outside plant
  • iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task
     
Tunable OTDR — FTBx-740C-DWC
  • C-band ITU grid channel selection to test through DWDM
  • Mux/demux
  • In-service testing of active networks
  • High-resolution and short dead zones
  • Select favorite or imported channels list
  • Supports combined DWDM and CWDM modules with FTB-2 platform
Fiber Inspection Probe — FIP-400B Wireless
  • 100% automated, one-step inspection process
  • Completely wireless, self-powered unit
  • Screenless operation enabled by pass/fail LED indicator
  • On-board connector endface analysis (IEC, IPC or custom standards)
  • Feature-rich ConnectorMax2 mobile application compatible with AndroidTM and iOS devices
  • Full reporting capabilities on mobile devices
  • All-day battery life that will never let you down
Fibernet Launch Lead: FUTURA
  • It can be held in the palm of one hand: 4 times smaller than standard launch boxes
  • 3 mm armoured external pigtail
  • Patented blocking system for a 100% fiber optics protection
  • Patchcord lenght can be easily adjusted by the user
  • Label can be customized with your own logo
  • Soft case with shoulder straps available for either 1 or 3 FUTURAs.
Ether10.DuaLoop
  • Two RJ-45 Port supporting: 10BASE-T, 100BASE-TX and 1000BASE-T
  • Two SFP Port supporting:10BASE-T, 100BASE-TX, 100BASE-FX, 1000BASE-T, 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX and 1000BASE-BX
  • Touchscreen
  • Battery operated
  • Rubber Boot
  • L1/L2/L3/L4 loopback
  • Q-in-Q VLAN support
  • MPLS support
  • Scan MAC/IP/VLAN/QinQ
  • Advanced Counts: Up to 8 filters at MAC, IP, TCP/UDP
  • LEDs all events at a glance
S178 V2 Fusion Splicer,
  • Internal battery charging
  • Illumination lamp lights up a wide area around v-grooves
  • User friendly LCD display offers 4 different X/Y image layouts
  • Displays immediate results with simplified splice result indicator red / green icon
  • Rugged and compact handheld design endures harsh environmental conditions
  • Fast splicing (7 seconds) at super low loss and fast heating (25 seconds) (by using semi-auto mode for splicing and pre-eating mode for heating)
  • 200 cycles (splicing & heating) with new battery configuration
  • Available for all METRO/LAN/FTTX fibers including ultra bend-optimized fibers (e.g. EZ-Bend® Fibers)
  • Splicer is compatible with Seikoh Giken* and Diamond** SOCs
  • Easy maintenance - Easy electrode replacement/ mirror-free alignment system
  • Easy software upgrade via the Internet
  • Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
  • PC interface software provides for user management of splicing programs and results
  • Auto-start shrink sleeve oven feature
  • Improved Graphical User Interface (GUI) to further enhance ease of use
  • Simplified splicer and heater programming
  • Large memory for storage of splice data (2,000) and images (100)
  • RoHS compliant
CableMaster 800
  • Test your network and coax cabling quickly and conveniently (RJ45 and F-coaxial connectors)
  • Get an overview of the correct cable wiring with a graphical display in wire map format
  • Determine cable lengths and distance to cable faults with a full TDR measurement
  • Carry out a PoE load test to ensure trouble-free operation of PoE devices (displays voltage and power)
  • Quickly document your work within a blink of the eye with screenshots of your test results
  • Keep an overview on running networks with the additional active testing features of CableMaster 800
To Top