Katalóg Produktov
Menu
Katalóg produktov

Monitorovací systémy » monitorovací TAPy

OPTICAL TAP UP TO 100 GBIT SINGLEMODE OPTICAL TAPS
  • The CUBRO optical TAPs maintain permanent passive connection for monitoring purposes without introducing a potential point of failure or disturbing other network connections. CUBRO passive optical TAPs deliver full-duplex monitoring with zero impact on the network. CUBRO optical Test Access Ports provide a simple but powerful way for in-service monitoring of high-speed optical networks such as SDH/SONET/OTN and Ethernet up to 100 Gbit.
  • Our optical TAPs are completely traffic transparent and offer 100% throughput. Therefore CUBRO optical TAPs can be used for any optical network application, regardless of the bitrate. Whether it is monitoring of STM-64, STM-256, 10G Ethernet or OTN signals, CUBRO is the right choice.
  • The network links can either be Multimode (850/1300nm) or Singlemode (1310/1550nm). Thus, CUBRO TAPs can be used for short-haul as well as long-haul applications. CUBRO optical TAPs are delivered with LC type connectors. Depending on the available optical power budget the SM optical splitting ratio is selectable in 10% steps (SM standard is 80/20), the MM splitting ratio is always 50/50%.
  • Every splitter used inside the optical TAP is carefully handled and insertion loss is measured before the TAP is shipped to the customer. Therefore CUBRO customers can be sure that their products will satisfy their needs.
OPTICAL TAP UP TO 100 GBIT MULTIMODE OPTICAL TAPS
  • The CUBRO optical TAPs maintain permanent passive connection for monitoring purposes without introducing a potential point of failure or disturbing other network connections. CUBRO passive optical TAPs deliver full-duplex monitoring with zero impact on the network. CUBRO optical Test Access Ports provide a simple but powerful way for in-service monitoring of high-speed optical networks such as SDH/SONET/OTN and Ethernet up to 100 Gbit. Our optical TAPs are completely traffic transparent and offer 100% throughput. Therefore CUBRO optical TAPs can be used for any optical network application, regardless of the bit rate. Whether it is monitoring of STM-64, STM-256, 10G Ethernet or OTN signals, CUBRO is the right choice. The network links can either be Multimode (850/1300nm) or Single Mode (1310/1550nm). Thus, CUBRO TAPs can be used for short-haul as well as long-haul applications. CUBRO optical TAPs are delivered with LC type connectors. Depending on the available optical power budget the SM optical splitting ratio is selectable in 10% steps (SM standard is 80/20), the MM splitting ratio is always 50/50%. Every splitter used inside optical TAP is carefully handled and insertion loss is measured before the TAP is shipped to the customer. Therefore CUBRO customers can be sure that their products will satisfy their needs.
PACKETMASTER EX2 CUBRO PACKETMASTER
  • General Functions: traffic filtering layer 4 | load balancing | bypass | GRE tunnel
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash
  • Amount of filter rules: 2048
  • Amount of in and out ports:
    • 4 x RJ45 10-100-1000 Mbit
    • 2 x SFP/SFP+ 1-10 Gbit
  • Backplan Bandwitdh: 28 Gbit/sec
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit | 10 Gbit
  • Supported Connections: RJ45 | SFP | SFP+
  • Managment: RS 232 CLI | SSH CLI | SSH Menu | SSH API | WEB GUI | REST API
  • Part Nr #: CUB.PM-EX2
PACKETMASTER EX32100 CUBRO PACKETMASTER
  • General Functions: traffic filtering layer 7 | load balancing | bypass | GRE tunnel | VXLAN tunnel | aggregate many to any | aggregate any to many
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash | sflo / nflow generation
  • Amount of filter rules: +100000
  • Amount of in and out ports:
    • 32 x QSFP 28 100 Gbit
  • Port Bandwitdh: 100 Gbit
  • Supported Connections: QSFP28
  • Managment: RS 232 CLI | SSH CLI | SSH Menu | SSH API | WEB GUI | REST API
  • Part Nr #: CUB.EX32100
PACKETMASTER EX484-3 CUBRO PACKETMASTER
  • General Functions: traffic filtering layer 7 | load balancing | bypass | GRE tunnel | VXLAN tunnel | aggregate many to any | aggregate any to many
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash | sflo / nflow generation
  • Amount of filter rules: 1024
  • Amount of in and out ports:
    • 48 x SFP/SFP+ 1-10 Gbit
    • 6 x QSFP 40 Gbit
  • Backplan Bandwitdh: 1,2 Tbit
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit
  • Supported Connections: SFP | SFP+ | QSFP
  • Managment: RS 232 CLI | SSH CLI | SSH Menu | SSH API | WEB GUI | REST API
  • Part Nr #: CUB.PM-EX484-3
PACKETMASTER EX5-2 CUBRO PACKETMASTER
  • General Functions: traffic filtering layer 4 | load balancing | bypass | GRE tunnel
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash | sflo / nflow generation
  • Amount of filter rules: 12000
  • Amount of in and out ports:
    • 48 x RJ45 10-100-1000 Mbit
    • 4 x SFP/SFP+ 1-10 Gbit
  • Backplan Bandwitdh: 176 Gbit/sec / 130 Mio packets/sec
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit | 10 Gbit
  • Supported Connections: RJ45 | SFP | SFP+
  • Managment: RS 232 CLI | SSH CLI | SSH Menu | SSH API | WEB GUI | REST API
  • Part Nr #: CUB.PM-EX5-2
SESSIONMASTER EXA 28 SESSIONMASTER EXA SERIES
  • General Functions: traffic filtering layer 4 | traffic filtering layer 7 | load balancing | bypass | GRE tunnel | VXLAN tunnel | aggregate many to any | aggregate any to many
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash | sflo / nflow generation
  • Amount of filter rules: up to millions
  • Amount of in and out ports:
  • 28 x 10 SFP+ 10 Gbit
  • Backplan Bandwitdh: 280 - 560 Gbit/sec
  • Port Bandwitdh: 1 Gbit | 10 Gbit
  • Supported Connections: SFP | SFP+
  • Managment: RS 232 CLI | SSH CLI | SSH API
SESSIONMASTER EXA SERIES SESSIONMASTER EXA SERIES
  • General Functions: traffic filtering layer 4 | traffic filtering layer 7 | load balancing | bypass | GRE tunnel | VXLAN tunnel | aggregate many to any | aggregate any to many
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash | sflo / nflow generation
  • Amount of filter rules: up to millions
  • Amount of in and out ports:
    • 2 x QSFP 40 Gbit
    • 28 x 10 SFP+ 10 Gbit
    • 40 x 10 SFP+ 10 Gbit
    • 56 x 10 SFP+ 10 Gbit
  • Backplan Bandwitdh: 280 - 560 Gbit/sec
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit
  • Supported Connections: SFP | SFP+ | QSFP
  • Managment: RS 232 CLI | SSH CLI | SSH API
SESSIONMASTER EXA8 SESSIONMASTER EXA SERIES
  • General Functions: traffic filtering layer 4 | traffic filtering layer 7 | load balancing | bypass | GRE tunnel | VXLAN tunnel | aggregate many to any | aggregate any to many
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash
  • Amount of in and out ports:
    • 8 x RJ45 10-100-1000 Mbit
  • Backplan Bandwitdh: 2 Gbit
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit | 10 Gbit
  • Supported Connections: RJ45 | SFP | SFP+
  • Managment: RS 232 CLI | SSH CLI | SSH API | REST API
Net.Hunter
  • Filter/Capture/Record at full duplex Gbit
  • 100% firm/hardware: nanosec accuracy
  • Non-stop packet capture 24/365
  • No MAC, no IP: Undetectable
  • No MAC, no IP: Cannot be hacked
  • Mirror and Pass-through mode
  • Storage: 120 or 500 GBytes hard disk
  • Storage: at wirespeed (1+1 GbE)
  • Filtering, Capture & Aggregation
  • Trigger Conditions
  • Captures CRC errored frames
  • Hardware PCAP Time Stamp
  • Wireshark friendly for protocol analysis
  • VoIP, IPTV, Data, TCP/IP and more
  • Built-in Tap to 1000BASE-T
  • Replays Traffic
  • VNC remote control
  • 15+15 Programmable Filters
  • IPv4 and IPv6
Net.Shark
  • World first hand-held, battery and 100% autonomous TAP
  • Hardware (FPGA) performace
  • Breaks out FDX traffic into separate streams to be dropped
  • It may aggregates filtered traffic to one DROP port into a single output stream
  • Traffic Regeneration
To Top